Checking Your Scanner - Visioneer 6200 Installation Manual

To install the PaperPort software:
1. Start Microsoft Windows and make sure that no other applications
are running.
2. Insert the PaperPort CD into your computer's CD-ROM drive.
The CD automatically starts.
Note: If the PaperPort CD does not automatically start, make sure
the CD drive's door is completely shut. If the CD still doesn't start,
the Autorun option on your computer is turned off. Click the
Windows icon named My Computer. The window shows the drives
available on your computer. Double-click the icon for your
CD-ROM drive to see the list of files on the CD. Double-click the
file named START32.EXE. The CD starts.
3. Click the PaperPort Software button and follow the instructions
on the screen.
After the PaperPort software is installed on your computer, you can
click the appropriate buttons on the CD to install the other
applications on the CD or print the PaperPort User's Guide.
4. When you're finished installing the software, remove the CD from
the CD drive and store the CD in a safe place.
5. Restart the computer.
That completes the installation. Please see "Checking Your Scanner" on
page 15 to continue setting up your Visioneer scanner.
C Y
HECKING OUR
Depending on whether your scanner is connected to a parallel port or
USB port, you use different ways to check if the scanner is properly
connected. If the scanner is connected to:
A parallel port, see "Checking a Scanner Connected to a Parallel
Port" on this page.
A USB port, see "Checking a Scanner Connected to a USB Port" on
page 17.
C
S
CANNER
Y S
HECKING OUR CANNER
15