Statistics; Rinsing; Making Coffee; Adjusting The Coffee Grinder - DeLonghi ECAM35075 Manual

• Default values:
Use this function to reset all the appliance and drink settings
(apart from the language which remains as selected the first
time the appliance was used). Select the item, then proceed as
follows:
4. "Reset?"; press ;
5. "Reset complete": the appliance confirms the reset and
goes back to the previous screen.
To exit, press (B5).

6.6 Statistics

This displays statistics relating to the machine. To view the sta-
tistics, proceed as follows:
1. Press (B6) to enter the "Settings" menu;
2. Press the selection arrows (B2) and (B4) until "Statistics" is
displayed between the two dotted lines;
3. Press (B3): statistics on the appliance are displayed,
use the selection arrows to scroll through the items;
4. Press (B5) to exit.
To go back to the main screen, press

7. RINSING

Use this function to deliver hot water from the coffee spouts
(A9) and (certain models only and if inserted) the hot water
spout (C6) to clean and heat the appliance's internal circuit.
Place a container with a minimum capacity of 100ml under the
coffee and hot water spouts.
Important! Danger of scalding.
Do not leave the appliance unattended while hot water is being
delivered.
1. To enable this function, press
pears on the display (B1);
2. After a few seconds, hot water is delivered from the coffee
spouts and (certain models only and if inserted) the hot
water spout to clean and heat the appliance's internal
circuit. A progress bar is displayed and fills gradually as
preparation proceeds;
3. To interrupt, press the arrow corresponding to "STOP" (B4).
Please note!
• If the appliance is not used for more than 3-4 days, when
you turn it on again, we strongly recommend performing
2/3 rinses before use;
• After cleaning, it is normal for the grounds container (A11)
to contain water.

8. MAKING COFFEE

8.1 Adjusting the coffee grinder

The coffee grinder is set by default to prepare coffee correctly
and should not require regulating initially.
However, if after the first few attempts it becomes apparent that
the coffee is either too weak and not creamy enough, or emerg-
es too slowly (drop by drop), this can be corrected by adjusting
the grinding adjustment dial (A5) (fig. 7).
Please note:
The grinding adjustment dial must be used only when the coffee
.
grinder is in operation.
at a time).
The effect of the adjustment will be noticed only after making
a further 2 cups of coffee, at least. If this adjustment does not
produce the desired result, turn the dial another click.

8.2 Tips for a hotter coffee

(B5): "Rinsing" ap-
To make a hotter coffee, proceed as follows:
•
•
•
Please note:
Varying the temperature has most effect for long drinks.
8.3 Making automatic recipes using coffee
Important!
Do not use green, caramelized or candied coffee beans as they
could stick to the coffee grinder and make it unusable.
1. Fill the container (A3) with coffee beans (fig. 8);
2. Place under the coffee spouts (A9):
10
If the coffee is delivered too slowly or not
at all, turn one click clockwise towards 7.
For fuller bodied creamier coffee, turn
one click anticlockwise towards 1 (do not
turn more than one click at a time other-
wise the coffee could be delivered a drop
perform a rinse cycle by pressing
warm the cups with hot water using the hot water function
(see section "12. Delivering hot water");
increase the coffee temperature in the "Settings" menu
(see section "6.5 General").
beans
- 1 cup if you want 1 coffee (fig. 9);
- 2 cups, if you want 2 coffees.
7
(B5);