DeLonghi ECAM35075 Manual page 26

PROBLEM
The milk does not come out of
the milk spout (D5)
The milk contains large
bubbles and squirts out of
the milk spout (D5) or there is
little froth
Milk drinks are not delivered
and "Please wait" is displayed
POSSIBLE CAUSE
The lid (D2) of the milk container lid is dirty
The milk is not cold enough or is not
semi-skimmed.
The froth adjustment dial (D1) is incorrectly
adjusted.
The milk container lid (D2) or froth adjustment
dial (D1) are dirty
The hot water connection nozzle (A8) is dirty
The machine is warming up to the optimum
temperature for delivering milk
REMEDY
Clean the milk container lid as described in sec-
tion "13.10 Cleaning the milk container"
Use skimmed or semi-skimmed milk at refrig-
erator temperature (about 5°C). If the result is
not as you wished, try changing brand of milk.
Adjust following the instructions in section
"10.2 Adjusting the amount of froth"
Clean the milk container lid and control knob
as described in the section "13.10 Cleaning the
milk container".
Clean the connection nozzle as described in
section "13.11 Cleaning the hot water nozzle"
Wait for a few moments.
25