Preparing For Threading - Bernina L 890 QUILTERS EDITION User Manual

7.1 Preparing for threading

Perform the required mechanical settings for the stitch e. g. needle position, rolled hem selection lever and
upper looper converter. Correct threading is ensured when following the color markings.
Prerequisite:
• The retractable thread guide is fully extended.
• The needles are in the top position.
• All threads that are not needed are removed.
> Raise the presser foot.
– The thread tensions are released. The thread can be inserted without resistance.
> Place the thread cones on the respective spool pin.
> Place the thread from the back through the corresponding color-coded thread guide.
> Engage the thread into the thread pretension with both hands downwards and check that the thread
does not slip out of the thread pretension when pulling it up backwards.
> Place the thread along the threading slot between the thread tension discs.
Threading
79