Changing The Needle Thread - Bernina L 890 QUILTERS EDITION User Manual

Threading
> Hold both thread ends and pull them apart.

Changing the Needle Thread

Pulling a Thread Tie through the Needle Eye
NOTICE
The needle can be bent. A bent needle affects the stitch formation.
> Cut the tie in front of the needle eye and thread the needle individually.
> Cut the thread above the thread cone.
> Change the thread cone.
> Tie the threaded thread to the new thread.
> Pull the threaded end of the thread until the newly knotted thread is in front of the needle eye.
> Cut off the new thread behind the knotting.
> Remove the excess thread from the needle eye.
> Thread the needle eye.
> Place the thread under the presser foot to the left.
90