Konica Minolta magicolor 2500W Service Manual page 164

Field Service Ver. 1.0 Aug. 2006
Use
PageScope
Web Connection
*2 XXXXXX are the low-order 6 digits of the printer MAC address.
Setting 1. Take note of the current setting.
/procedure 2. Enter the SERVICE/SERVICE PERSON mode.
3. Select [RESTORE FACTORY DEFAULT] and press the Menu Select key.
4. When the initialization procedure is completed, restart the machine.
5. Make the settings that were valid before initialization once again.
NOTE
• The reinitialization procedure resets the settings and counter values backed
up in the parameter chip on the printer control board. Use utmost care when-
ever executing reinitialization.
• After the reinitialization has been executed, be sure to replace all toner car-
tridges, 2nd transfer roller, transfer belt unit, fusing unit, and drum cartridge
with new ones.
13. SERVICE PERSON mode (magicolor 2530 DL)
Item
Admin. Password
Refresh Rate
KONICA MINOLTA
Contact Name
Customer Support
http://printer.
Contact Information
konicaminolta.com/
Product Help URL http://pagescope.com/
http://printer.
Corporate URL
konicaminolta.com/
Supplies and Acces-
http://www.q-shop.com/
sories
http://printer.
Online Help URL
konicaminolta.com/
Auto IP
WINS/NetBIOS
Resolution
NetBIOS Name
Domain/Workgroup
Use DHCP for WINS
Primary WINS
Secondary WINS
Bonjour Service
Discovery
Bonjour Config
Printer Name
Bonjour Config
Host Name
IPP Config
Printer Name
IPP Config
Printer Location
Factory default value
administrator
30 seconds
DHCP
Checked
MC2530DLXXXXXX *2
WORKGROUP
Checked
grayed out/disabled
grayed out/disabled
Checked
KONICA MINOLTA
magicolor 2530 DL
MC2530DLXXXXXX *2
magicolor 2530 DL
Blank
Ref. page
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
127