Konica Minolta magicolor 2500W Service Manual page 145

11. MENU (magicolor 2550/magicolor 2550DN)
E. AUTO CONTINUE
Function • Enables or disables printing when the size of the media loaded in the tray does not
match that of the print data.
Use • To print data on the media loaded in the tray of the media loaded in the tray does not
match that of the print data.
Setting • The default setting is OFF.
/procedure
F. TRAY CHAINING
Function • Allows a print cycle to continue without interruption when the current tray runs out of
media during the print cycle by automatically reselecting another tray, in which the
media of the same size and the same type is loaded.
Use • To allow media to be pulled from another tray when the media in the first tray runs
out.
Setting • The default setting is YES.
/procedure
NOTE
• This setting is available only when an optional Lower Feeder Unit is installed.
G. MAP
(1) MODE
Function • Selects whether or not the Tray Mapping function is used.
Use • To specify whether trays are mapped.
Setting • The default setting is ON.
/procedure
(2) LOGICAL TRAY 0-9
Function • Specifies whether jobs received from another manufacturer's printer driver are
printed using Tray 1 or Tray 2.
Use • To specify the media source for print jobs using another manufacturer's printer driver.
Setting • Only the default for LOGICAL TRAY 2 is PHYSICAL TRAY 2. PHYSICAL TRAY 1 is
/procedure the default for all trays other than LOGICAL TRAY 2.
108
"OFF"
"YES"
"ON"
PHYSICAL TRAY 1
Field Service Ver. 1.0 Aug. 2006
ON
NO
OFF
PHYSICAL TRAY 2