Electrical Connection - Beko MCI 44313 X User Manual

3 Installation and connection
Building in
Do not hold or carry the appliance by the door handle.
A
The door handle cannot hold the weight of the appli-
ance and may break off.
1. Carefully push the oven into the box, making sure that it is in the centre.
2. Open the door and fasten the microwave with the screws that were supplied.
8
• Fully insert the appliance and centre it.
• Do not kink the connecting cable.
• Screw the appliance into place.
• The gap between the worktop and the appliance must not be closed by additional battens.

3.2 Electrical connection

• The appliance is fitted with a plug and must only be connected to a properly installed earthed socket.
• Only a qualified electrician who takes the appropriate regulations into account may install the socket
or replace the connecting cable.
• If the plug is no longer accessible following installation, an all-pole isolating switch must be present
on the installation side with a contact gap of at least 3 mm.
• Contact protection must be ensured by the installation.
Microwave Oven / User Manual
10
15 / EN