Reset Values Of The Status Reporting System; Lxi Configuration - Emerson R&S SGT100A User Manual

®
R&S SGT100A
larly since faulty commands from the controller to the instrument are recorded there as
well.

9.5.8 Reset values of the status reporting system

The following table contains the different commands and events causing the status
reporting system to be reset. None of the commands, except for *RST and
SYSTem:PRESet affect the functional instrument settings. In particular, DCL does not
change the instrument settings.
Table 9-6: Resetting the status reporting system
Event
Effect
Clear STB, ESR
Clear SRE, ESE
Clear PPE
Clear error queue
Clear output buffer
Clear command processing
and input buffer
1) The first command in a command line that immediately follows a <PROGRAM MESSAGE TERMINA-
TOR> clears the output buffer.

9.6 LXI configuration

"LAN eXtensions for Instrumentation" (LXI) is an instrumentation platform for measur-
ing instruments and test systems that is based on standard Ethernet technology. LXI is
intended to be the LAN-based successor to GPIB, combining the advantages of Ether-
net with the simplicity and familiarity of GPIB.
On the R&S SGT, the LXI functionality is already installed and enabled. Thus, the
instrument can be accessed via any web browser (like the Microsoft Internet Explorer)
to perform the following tasks:
●
Modifying network configurations
●
Remote control of the instrument
●
Performing SCPI remote diagnostics
User Manual 1176.8674.02 ─ 12
Network operation and remote control
Switching on supply DCL,
voltage SDC
Power-On-Status- (Device
Clear Clear,
Selected
Device
0 1
Clear)
- Yes -
- Yes -
- Yes -
Yes Yes -
Yes Yes Yes
Yes Yes Yes
LXI configuration
*RST or STATus: *CLS
PRESet
SYSTem:
PRESet
- - Yes
- - -
- - -
- - Yes
1) 1) 1)
- - -
337