Table of Contents
Advertisement
Network
Close Control Session
This item is used to forcibly disconnect the control session of the FTP.
• Submit button
This button is used to disconnect the currently connected control session of the FTP.
Clear NMI Setting
This item is used to delete the NMI setting information and replace it with the initial values.
• Submit button
This button is used to initialize the current NMI setting information.
USB Memory
This item is used to indicate whether the USB memory device inserted into the rear panel is usable.
Used for pre-check of USB memory devices.
• Text box
Indicates whether a USB memory device is mounted or not.
Preview Control Mode
This menu item is used to forcibly reset the Program/Preview control when control from the PWS-100PR1 is interrupted
for some reason after Program/Preview control from the PWS-100PR1.
• Submit button
This button is used to forcibly reset the Program/Preview control.
Melt Mode
This menu item is used to forcibly reset the Melt control when control from the PWS-100PR1 is interrupted for some
reason after Melt control from the PWS-100PR1.
• Submit button
This button is used to forcibly reset the Melt control.
SDI Input Watermarking
This item is used to select whether to automatically detect the marker superimposed in SDI input signals and delete it
or to forcibly delete it, in the HD HFR mode.
• Pull-down list (Port A-1 to Port D-1)
Auto: Automatically detects the marker and deletes it.
Forced: Forcibly deletes the marker.
PWS-4500
3-7
Advertisement
Table of Contents
