Land Roll Clutch - Ransomes MINOR MK. 7 Instructions For The Operation And Maintenance

RANSOMES SIMS & JEFFERIES (AUSTRALIA) PTY. LTD. 9
Figure 4
TRANSMISSION CHAINS.
These are both adjusted by posi oning the land roll plate clutch. To adjust, disengage the
clutch by li ing the clutch lever, rotate the outer plate un l the two holes line up with the
two holes in the nut beneath, insert pin spanner provided and turn an -clockwise to slacken
nut, slide the clutch bodily to ghten chains and then re- ghten nut. When adjusted the
chains should be slightly slack in all posi ons.
If at any me a chain is removed, take care when replacing that the gap in the spring clip
points away from the direc on of rota on.

LAND ROLL CLUTCH.

Adjustment is provided at the lower end of the Bowden cable. When adjusted correctly
there should be a small amount of play between the end of the opera ng pin and lever
when the clutch is disengaged, i.e., the clutch should drive firmly when engaged and be
completely free when disengaged.