Error Message - Panasonic TOUGHBOOK CF-45 Series Service Manual

sll
5.2 Error Message
Source of
pedis
Main PCB Test
CMOS RAM shutdown }]CRAM
byte rv test
Programmabie interrupt] PIT
Shutdown byte test failed. (F10) ~
Write data: xxxx Read data: xxx
Timer #2 counter r/w failed. (F10)
Write data: xx Read: xx
Timer count failed. (F10)
High count value expected: 00 current data: 3
Page register r/w test failed. (byte) (F10)
Write data = xx Read data = xx
Page register r/w test failed. (word) (F10)
Write data = xx_Read data = xx
1C11 Main 9, 10
Ref.Page
Component} shematic
Diagram
Main 9, 10
DMA controller register r/w test failed. (F10)
VO address: xxxx
Write data: xxxx Read data: x00
Keyboard controller input buffer full. (F10)
Keyboard line always low. (clock) (F10)
Keyboard line always high. (clock) (F10)
Keyboard line always low. (data) (F10)
Keyboard line always high. (data) (F 10)
Keyboard controlier output buffer empty. (F10)
Keyboard controller self test failed. (F 10}
Return code: xx
PIC #0 interrupt mask register failed. (F 10)
Write data: xx Read data: xx
PIC PIC #1 interrupt mask ragister failed. (F 10)
Write data: xx Read data: xx
PIC PIC #0 handling error (F 10)
ISR status: xx
controller test
PIC PIC #1 handling error (F10)
ISR status: xx
PIC #0 no interrupt occurred, (F710)
PIC #1 no interrupt occurred. (F140.
RTC Real-time clock UIP bit always ON. (F10)
ATC Real-time clock UIP bit always OFF. (F10)
RTC Real-time clock data out of range. (F10)
(Second data: ss) (Minute data: mm)
(Hour data: hh) (Data data: dd)
{Month data:_mm) (Year data:
Realtime clock test
RAM Test
DRAM t/w test
DRAM RW test failed. (F141)
Address: 000xxxxH
Write data: xxH_Read data: xxH
i PCB
Main 9, 10
Main 9, 10
DRAM refresh test DRAM DRAM Refresh test failed. (F11)
Address: XxxxxxxH
Write data: xxH_Read data: xxH
DRAM address line test{DRAM DRAM Address Line test failed. (F11)
The data written into address: xxooxxxH
can be read from address: yyyyyyyyH |
[ PCB
Main PCB
Protect test
[xx] Protected mode error. (F11}
Main PCB
Main 4,5