Panasonic TOUGHBOOK CF-45 Series Service Manual page 26

Factory| Setup
Name Adr | default | default - * Description
CMOS_Disk0..Parms 23h | Auto | Auto | Custom drive ry paraisters = Lz low Type 46
. | Note: Automatic Configuration value POST should set here when
type 46 HDD is exist.
CMOS_DiskO_Parms 24h | Auto. } Auto [Custom drive 0 parameters - Lz high Type 46
Note: Automatic Configuration value POST should set here when
type 46 HDD is exist.
CMOS..DiskO_Parms 25h | Auto | Auto | Custom drive 0 parameters - Sectors/track Type 46
Note: Automatic Configuration value POST should set here when
type 46 HDD is exist.
Custom drive 1 parameters - Cylinder low Type 47
Note: Automatic Configuration value POST should set here when
ype 47 HDD is exist.
Custom drive 1 parameters - Cylinder high Type 47
Note: Automatic Configuration value POST should set here when
type 47 HDD is exist.
Custom drive 1 parameters - Heads Type 47
Note: Automatic Configuration value POST shoutd set here when
type 47 HDD is exist.
Custom drive 1 parameters - Precomp cyl Type 47
Note: Automatic Configuration value POST should set here. when
type 47 HDD is exist.
Custom drive 1 parameters - Precomp cyl Type 47
Note; Automatic Configuration value POST should set here when
47 HDD is exist.
Custom drive 1 parameters - Lz low Type 47
Note: Automatic Configuration value POST should set here when
47 HDD is exist.
Custom drive 1 parameters - Lz high Type 47
Note: Automatic Configuration value POST should set here when
47 HDD is exist.
Custom drive 1 parameters - Sectors/track Type 47
Note: Automatic Configuration value POST should set here when
type 47 HDD is exist.
High byte CMOS checksum of 10h - 2Dh.
Low byte CMOS checksum of 10h - 2Dh.
Ext. configured memory size, low byte, in 1KB units.
Note: Same as address 17h.
CMOS_Disk1_Parms 26h | Auto | Auto
CMOS_Diski_Parms 27h | Auto | Auto
CMOS_Diskt_Parms 28h | Auto | Auto
CMOS_Disk1_Parms 29h | Auto | Auto
CMOS-_Disk1_Parms 2Ah | Auto | Auto
CMOS.Disk1_Parms 2Bh | Auto | Auto
CMOS-_Disk1_Parms 2Ch | Auto
eee eee a eee (IE
CMOS_Disk1_Parms 2Dh | Auto | Auto
Checksum High 2Eh | Auto | Auto
Checksum1 Low 2Fh | Auto | Auto
Ext. RAM size, Low 30h | Auto | Auto
Ext. RAM size, High 31h | Auto | Auto Ext. configured memory size, high byte, in 1KB units.
Note: Same as address 18h.
Date Century 32h } 19h or| 19h or | Date century byte, in BCD format
20h 20h.
ACPI S3 Wakeup Running 33h | 00h 04h Bit7-4: Boot Fail Count
Hib Running Bit3; DRAM Parity error (Reserved)
Hib SPP Valid Bit2: Hibernation Special Partiton is valid
DRAM PARITY Bit ibernation Resume is Required
BootFail Count Bit0:. ACPI S3 Wakeup Running
SR ASMi Return 34h _| Auto | Auto | ASMI function retum code.
SR ASMI Error 35h_| Auto |-Auto. _{ASMI function error code.
Checksum2 High 36h_| Auto | Auto | High byte CMOS checksum of 7Eh-7Fh.
Checksum2 Low 37h | Auto | Auto [Low byte CMOS checksum of 7Eh-7Fh.
Auto Status 38h | 'Auto | Auto | Automatic configuration reason byte.
POST should set this byte 'OR' ed with COMS.
OEh at automatic configuration.
Last APMC command 39h | Auto | Auto - |Last SMI code from APMC.
Last KBC command 3Ah | Auto | Auto |Last SMI code from KBC.
SuspMemConf DRAMC 3Bh Save area of core chip for suspend (3Bh-4Eh)
SuspMemConf DRAMT 3Ch Save area of core chip for suspend (8Bh-4Eh)
SuspMemConf DRBO. 3Dh _i Save area of core chip for suspend (3Bh-4Eh}