Panasonic TOUGHBOOK CF-45 Series Service Manual page 54

CF-45
For 4. U.S.A... (Fig.3}
Press @ * and keys. 'Note: Press appropriate number according
to the keyboard layout.
@ Display
KEYBOARD TEST
Press each key for character replacement
PERE REEEREPPEEEead
TE RIBA TUN LAN LL a
ee |
PErbirreunrue nN
Pert rnenrirrgel
rot I PEree
EE
If correct, press "Y" and "ENTER"
If not correct, press "N" and "ENTER"
{Norma! Message): Keyboard is OK Hit any key when ready._
When an error message is displayed, refer to [5.2 Error Message]:
For 5. SCAN CODE RETURN TEST. (Fig.2)
Press (5) and keys.
press the key of the test you would like to
Display perform.
KEYBOARD RETURN CODE TEST {The routine will terminate if no entry is pressed.)
Press any key.
immediately after this message is displayed,
(Normal message) : KEY Key has been hit or broken (F10)
SCAN code : xx
Test done!! Hit any key when ready._
When an error message is displayed, refer to [5.2 Error Massage].
4) TRACK BALL/MOUSE TEST
Fig.1 displayed.
Press (7) and keys.
@ Display
"1. If normal, the cursor moves according to the
drags Bou Mouse Test movement of the track ball.
m1
o *2. By pressing either the upper or lower button
nero aa 2 on the track ball, the display will change from
: OFF to ON.
i 2
Is this correct ? (Y/N) if the mouse is connected, the cursor moves
according te the movement of the mouse.
By pressing either the left or right button on the
mouse, the display-will change from OFF to ON.