Panasonic TOUGHBOOK CF-45 Series Service Manual page 141
Hide thumbs
Also See for TOUGHBOOK CF-45 Series:
- Reference manual (39 pages) ,
- Operating instructions manual (32 pages) ,
- Reference manual (43 pages)
Table of Contents
Advertisement
nd.or Hibernation mode.
=
Do not add peripherals while the computer
the Suspend or Hibernation mode;
'seal
abnormal operation may result.
;
:
6.14 Removing the Backlight.
Hooks (A)
Figure 36.
Figure 34
i
5
1. Remove the three screws.
6. Open the FPC case.
2. Bend the hooks. (A) at the three locations with a
Disconnect the FPC (A) from connectors (A), (B).
pliers toward outer side.
7. Disconnect the FPC (B) and connector (C).:
.
3, Remove the plate in the direction of arrow:
Remove the PCB {A).
PCB (8)
Figure 37
Figure 35
* "8. Open the PCB (B) and PCB (C)
4, Remove the four screws:
5. Bend the hooks at two locations with a
pliers toward outer side.
Advertisement
Table of Contents
