Samsung DVD-R155 Service Manual page 16

Software Update
1) Press OPEN/CLOSE to open the disc tray.
2) Insert the update CD-R disc with the software update, label
facing up.
3) Press OPEN/CLOSE to close the disc tray.
* It takes about 1~2 minites before the mesage below appears.
Do you want to update drive-firmware?
Version : Xx.X.R155 -> XX.X.R155
Yes
* If you don't see the message above, try another disc. Generally, this is caused by disc quality and by disc creating problem.
4) Press the OK button on the remote control (Fig. 3-1).
Drive Update
Now, processing...
Please, do not turn off the power.
5) It takes about 1~2 minutes to complete the update.
The message below will be displayed in the screen after update is completed and the tray will open automatically.
Drive Update
Drive Firmware is successfully
6) After removing the update disc, turn off the unit with power button.
And there after turn on the unit with power button and then the will be closed.
The drive firmware is now completed.
3-2
Drive Update
No
Fig. 3-2
Fig.3-3
updated.
Fig. 3-4
Fig. 3-1 Remote Control
Atfer checking old and new version, select "Yes" or "No"
with " " or " " on the remote control.
* The Version is indicated by "XX.X modelname"
You will see "LOAD" on FLT Display.
Fig. 3-5
Samsung Electronics