Accessing Freezer Compartment Components
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
Freezer Handle
1. While holding the handle, insert the short end of the hex key
into a setscrew hole and slightly rotate the hex key until it is
engaged in the setscrew.
2. Using a right to left motion loosen the setscrew a quarter-
turn at a time.
A. Shoulder screw
B. Setscrews inside the handle
3. Repeat steps 1 and 2 for the other setscrew. Slowly pull the
handle away from the door or drawer.
4. If necessary, use a Phillips screwdriver to remove the
shoulder screws from the door.
Upper Basket
1. Open the freezer drawer to its full extension.
2. Release the retainers on the right and left sides of the basket.
3. Lift out the upper basket by pressing in both the retainers.
Middle Basket
4. Insert a wide blade screwdriver from the top.
5. Force out the top of the slide as you insert a narrow blade
screwdriver into the hole and force the stop out.
6. Do the above step 2 for the right side.
7. Lift out the basket.
Four Door Bottom Mount
COMPONENT ACCESS
n
4-19