Accessing Refrigerator Compartment Components (Continued)
Secondary Mullion LED
18. Insert a putty knife under the LED.
19. Push in to release the lock and pry up to remove the LED and
disconnect the harness.
Center Divider
20. Pull forward the center divider and lift out.
A. Center Divider
21. To remove the rails on the divider, remove the two screws
22. Remove rear support by sliding the rail to the left and pulling
A
23. Remove side rail assemblies on both sides by lifting up and
holding the divider.
NOTE: When removing rails on either sides of divider there is
a screw that goes into the rail on other side to help hold it.
Remove this screw also.
the right side out and forward.
pulling forward.
Four Door Bottom Mount
COMPONENT ACCESS
n
4-15