Jenn-Air JFX2897DRM Service Manual page 39

Accessing Refrigerator Compartment Components (Continued)
Water Reservoir and Valve Assembly
13. Remove three, 1/4" (6.4 mm) hex head screws.
14. Disconnect ice maker fill tube from the isolation valve
connected to the filter head.
15. Disconnect electrical connections to water reservoir and
valve assembly. Disconnect dispenser and ice maker fill tubes.
A
A. Dispenser fill tube
B. Ice Maker fill tube
16. Drop the front of the housing and disengage the rear tabs
from the three slots in the top of the refrigerator cabinet.
17. Disconnect 1/4" (6.4 mm) reservoir water tube from dual
water valve and cut the five nylon wire ties to remove
reservoir.
NOTE: Reservoir wire ties do not need to be removed to
access remaining water reservoir and valve assembly
components.
B
COMPONENT ACCESS
A
A
A
B
A. Wire ties
B. Reservoir
C. 1/4" (6.4 mm) reservoir water tube
D. Dual water valve
Four Door Bottom Mount
A
D
C
A
n
4-7