Polaris Patriot 650 2024 Owner's Manual page 132

OPERATION
Engaging the starter when the engine is running WILL result in serious engine
damage, especially if the engine is in reverse. Never engage the starter when
If equipped, secure rail scratchers to rail beams so they do not bend when in
ENGAGING REVERSE
1. Stop the snowmobile and leave the engine idling.
2. Make sure the area behind your vehicle is clear.
3. Push the yellow button on the left-hand control for one second, then release.
The engine will automatically reduce RPM and start a reverse rotation. A
flashing reverse light on the instrument panel will indicate that the
transmission is in reverse.
4. Apply the throttle slowly to make sure the transmission is in reverse. The
maximum engine RPM will be 5000 when in reverse.
If the engine stops running, the snowmobile will be in forward gear when it's
DISENGAGING REVERSE
1. Stop the snowmobile and leave the engine idling.
Engaging the starter when the engine is running WILL result in serious engine
damage, especially if the engine is in reverse. Never engage the starter when
2. Push the reverse button for one second and release. The engine will slow
and begin to rotate forward. The light on the instrument panel will shut off.
3. Apply the throttle slowly to make sure the vehicle is in forward.
EMERGENCY STOPPING
The following chart lists methods for stopping the snowmobile in the event of an
emergency.
130
CAUTION
the engine is running.
IMPORTANT
reverse.
TIP
restarted.
CAUTION
the engine is running.