Table of Contents
Advertisement
OPERATION
ENGINE STOP SWITCH
Push down on the engine stop
q
switch
to ground out the
ignition and stop the engine
quickly. Pull the switch up to the
ON position to allow restarting.
THROTTLE SAFETY SWITCH
When working properly, the
throttle safety switch is designed
to stop the engine whenever all
pressure is removed from the
throttle lever and the throttle
cable or valves do not return to
the normal closed position. The
q
throttle lever pin
releases
w
pressure to the safety switch
and stops the engine.
WARNING
Operating the snowmobile with a faulty throttle safety switch can result in
serious injury or death in the event of an accident. If the throttle safety switch
does not shut off the engine during a carburetor/throttle system malfunction,
immediately push down the engine stop switch. Do not start the engine again
until the malfunction has been corrected by your authorized POLARIS dealer.
To test the throttle safety switch, do the following:
127
Advertisement
Table of Contents
