Troubleshooting Guide; Helpful Tips; Replacement Parts - Shark NINJA COMBI SFP700 Series Owner's Manual

TROUBLESHOOTING GUIDE

Progress bars are shown on the display screen when using COMBI COOKER functions.
• This indicates the unit is building steam. When the unit has finished, your set cook time will begin
counting down.
There is a lot of steam coming from the unit when using the Steam function.
• It's normal for steam to release through the vent during cooking.
The unit is counting up rather than down.
• The cooking cycle is complete and the unit is in Keep Warm mode.
"ADD POT" error message appears on display screen.
• Complete Combi Pan is not inside the cooking base. The Combi Pan is required for all COMBI
COOKER functions.
"ERR" message appears.
• The unit is not functioning properly. Please contact Customer Service at 1-877-646-5288. So we may
better assist you, please register your product online at registeryourninja.com and have the product
on hand when you call.

HELPFUL TIPS

1
When referencing our Meal Charts, for larger cuts of meat add 3 to 5 minutes to the cook time
(but please note this may overcook grains). We recommend sticking to suggested height and weight
of meats.
2
For consistent browning, make sure ingredients are arranged in an even layer on the bottom of
the pot with no overlapping. If ingredients are overlapping, make sure to shake halfway through the
set cook time.

REPLACEMENT PARTS

To order additional parts and accessories, visit ninjaaccessories.com or contact Customer Service at
1-877-646-5288. We ask that you register your product online at registeryourninja.com and have the
product on hand when you call, so we may better assist you.
15 ninjakitchen.com