Shark NINJA COMBI SFP700 Series Owner's Manual page 8

Combi Bake
1
Reference the Inspiration Guide for direction
on how to assemble ingredients and
accessories based on recipes/charts. Be sure
to add water to the Combi Pan.
2
Move SmartSwitch to COMBI COOKER, then
use the FUNCTION arrows to select COMBI
BAKE. The default temperature setting will
display. Use the up and down arrows to the
left of the display to choose from 250°F to
450°F, in either 10 or 15 degree increments.
3
Use the up and down arrows to the right of the
display to adjust the cook time from 1 minute to
1 hour and 15 minutes, in 1 minute increments in
1 minute increments up to 1 hour.
4 Press START/STOP to begin cooking.
5 The display will show progress bars indicating
the unit is building steam. This will take about
20 minutes.
6 When preheating has completed, the timer will
begin counting down.
7
When cook time reaches zero, the unit will beep
and display "End". If your food requires more time,
use the up arrow to the right of the display to
add additional time. The unit will skip preheating.
beep and display "End".
+
Steam
1
To get started, add water to the Combi Pan
and add the crisper tray. Add ingredients on
top of the crisper tray and insert into level 1.
2
Move SmartSwitch to COMBI COOKER,
then use the FUNCTION arrows to
select STEAM.
3
Use the up and down arrows to the right of
the display to adjust the cook time.
4 Press START/STOP to begin cooking.
NOTE: There is no temperature adjustment when
using the STEAM function.
5
The unit will begin preheating to bring the
liquid to a boil. The display will show progress
bars indicating the unit is building steam.
When preheating has completed, the timer
will begin counting down.
6 When cook time reaches zero, the unit will
beep and display "End".
NOTE: After cycle is complete, remove ALL
food and accessories, then close the door and
press the START/STOP button to begin the dry
cycle. This will help to remove excess water.
+
ninjakitchen.com
8