Shark NINJA COMBI SFP700 Series Owner's Manual page 10

USING THE AIR FRY/STOVETOP FUNCTIONS
To turn on the unit, plug the power cord into a
wall outlet, then press the
Air Fry
1
Place the Crisper Tray in the Combi Pan. Slide
the Combi Pan into the designated rail.
2
Add ingredients on the crisper tray and install in
level 1.
3
Move SmartSwitch to AIR FRY/STOVETOP,
the unit will default to AIR FRY. The default
temperature setting will display. Use the up
and down arrows to the left of the display to
choose a temperature from 250°F to 400°F,
in either 10 or 15 degree increments.
4 Use the up and down arrows to the right of
the display to adjust the cook time in minute
increments up to 1 hour.
5
Press START/STOP to begin cooking.
NOTE: For best results, it is recommended
to periodically shake ingredients during
air frying. You can open the door and toss
ingredients with silicone tipped tongs for even
browning. When done, slide the Combi Pan
back into the rails, and close the door.
6 When cook time reaches zero, the unit
will beep and display "End".
button.
+
Bake
1
Reference the Inspiration Guide for direction
on how to assemble ingredients and
accessories based on recipes/charts.
2
Move SmartSwitch to AIR FRY/STOVETOP,
then use the FUNCTION arrows to select
BAKE. The default temperature setting will
display. Use the up and down arrows to the
left of the display to choose a temperature
from 300°F to 400°F, in either 10 or 15
degree increments.
3
Use the up and down arrows to the right of the
display to adjust the cook time up to 1 hour in
1 minute increments.
4 Press START/STOP to begin cooking.
5
When cook time reaches zero, the unit
will beep and "End".
NOTE: The unit will preheat for 3 minutes
before the timer starts.
+
ninjakitchen.com
10