Shark NINJA COMBI SFP700 Series Owner's Manual page 7

USING YOUR NINJA COMBI
USING THE COMBI COOKER FUNCTIONS
To turn on the unit, plug the power cord into a
wall outlet, then press the
Combi Meals
1
Add liquid and ingredients to the Combi Pan
according to the recipe/meal chart.
2
Add ingredients to the bake tray.
3
Slide the Combi Pan into level 1 (bottom
position) and the bake tray into level 2
(top position).
4 Move the SmartSwitch up to COMBICOOKER,
then use the FUNCTION arrows to select
COMBIMEALS. The default setting will display.
Use up and down arrows to the left of the
display to choose a temperature from 250°F
to 450°F, in either 10 or 15 degree increments.
5
Use the arrows to the right of the display to
adjust the cook time in 1 minute increments
up to 60 minutes.
NOTE: Temperatures over 400F only extend
to 30 minutes
6 Press START/STOP to begin cooking.
7
The display will show progress bars, indicating
the unit is building steam. When the unit
reaches the appropriate steam level, the timer
will begin counting down.
8
When cook time reaches zero, the unit will
beep and display "End". If your food requires
more time, use the up arrows to the right of
the display to add additional time. The unit
will skip preheating.
7
ninjakitchen.com
TM
button.
+
Combi Crisp
1
Reference the Inspiration Guide for direction on
how to assemble ingredients and accessories
based on recipes/charts. Be sure to add water
to the Combi Pan.
2
Move SmartSwitch to COMBI COOKER. Use
the FUNCTION arrows to select Combi Crisp.
The default setting will display. Use the up
and down arrows to the left of the display to
choose a temperature from 250°F to 450°F,
in either 10 or 15 degree increments.
3
Use the up and down arrows to the right of
the display to adjust the cook time from 1 to
60 minutes, in 1 minute increments.
4 Press START/STOP to begin cooking.
5
The display will show progress bars, indicating
the unit is building steam.
6 When the unit reaches the appropriate steam
level, the timer will begin counting down.
7
When cook time reaches zero, the unit will
beep and display "End". If your food requires
more time, use the up arrow to the right of
the display to add additional time. The unit
will skip preheating.
+