Shark NINJA COMBI SFP700 Series Owner's Manual page 12

Toast
1
Place bread in the Combi Pan.
2
Insert the Combi Pan the Level 1 position.
3
Move the SmartSwitch to AIR FRY/STOVETOP,
then use the FUNCTION arrows to select
TOAST. Default slices and shade will appear.
4 Use the up and down arrows to the right of the
display to indicate number of slices.
5
Use the up and down arrows to the left of the
display to select desired shade. Use the up and
down arrows to the left of the display to select
"lite, "med," "dark."
6
Press START/STOP to begin toasting.
+
7
When cook time reaches zero, the unit will
beep and display "End".
Sear/Sauté
1
Begin by adding ingredients to the Combi Pan
and inserting into the Level 1 position.
2
Move SmartSwitch to AIR FRY/STOVETOP
then use the FUNCTION arrows to select SEAR/
SAUTÉ. Use the up and down arrows to the
left of the display to select "Lo1," "2," "3," "4,"
or "Hi5."
NOTE: There is no time adjustment available
when using the Sear/Sauté function.
3
Press START/STOP to begin cooking. The
timer will begin counting up.
4 Press START/STOP to turn off the SEAR/
SAUTÉ function. To switch to a different
cooking function, press START/STOP to
end the cooking function then use the
SmartSwitch and center front arrows to
select your desired function.
NOTE: You can only use this function with the
door open.
NOTE: ALWAYS use nonstick utensils in the
Combi Pan. DO NOT use metal utensils, as they
will scratch the nonstick coating on the pot.
NOTE: SEAR/SAUTÉ will automatically turn
off after 1 hour for "4" and "Hi5" and 4 hours
for "LO1," "2," and "3."
+
ninjakitchen.com
12