Nd Vehicle Programming - CrimeStopper SP-300 Installation Instructions Manual

PROGRAMMING SECOND VEHICLE:
To set up your remote, follow the "Transmitter Programming" steps 1 and 2 (above) In step #3 press the side
button on YOUR remote first, for 2-way press and hold for side button until the "2" Icon show on the remote,
then press the Lock and Unlock button. Your lights should flash indicating the remote is programming. Turn
key off to exit programming mode. Your vehicle should now be programmed for the second vehicle.
NOTE: Your original transmitters must be learned at the time of programming for second vehicle. This system
can learn up to 4 remotes.
SLT
2 VEHICLE TRANSMITTER PROGRAMMING
VEHICLE 1 = RED LED
VEHICLE 2 = BLUE LED
VEH 1 / VEH 2
Push 2 Seconds
to change from
Vehicle 1 to 2.
VEHICLE 1 or 2
FUNCTION 1 or 2
2 - 1
9
TRANSMIT ICON
VEH 1 / VEH 2
CLOCK SET
Push 2 Seconds
to change from
Vehicle 1 to 2.