CrimeStopper SP-300 Installation Instructions Manual page 13

OPTION PROGRAMMING Cont.
14. CARJACK FEATURES
This option controls the unit's Car Jack features. Enable or Disable Carjack (Turn ON or OFF) with this option.
15. Lock/Unlock or Arm/Disarm with Ignition ON
This option allows you Arm and Disarm the system with the Ignition ON. This is used when there is a remote
starter added to the system. The default is lock/unlock without arm and disarm while the ignition on.
16. Data Port Protocol:
This option controls the Data Port Protocol for 1-Way (OFA modules) or 2-Way (SL modules). The default is
set for 2-Way Protocol. This option has no effect on conventional wiring of Bypass modules.
Data bus Systems: Data Controlled door locks, Factory Security and many accessories
This unit includes DP Technology it will allow you to plug our modules which operate Data control Door locks,
accessories, and Bypass Factory security systems directly into the unit by via Data Port. The module cable
plugs directly to the Data port on the side of the unit. Please refer to Databus module manual for detail
instructions.
Option #16 controls the Data Port Protocol for 1-Way (OFA modules) or 2-Way (SL modules). The default is
set for 2-Way Protocol. This option has no effect on conventional wiring of Bypass modules.
13