Table of Contents
Advertisement
WIRING: SHOCK SENSOR
SHOCK SENSOR: The sensor supplied with this system does not require any additional wiring. Simply
mount the sensor in a suitable location, plug it in, and adjust the sensitivity. There are 2 LED's on the shock
sensor to assist you in adjusting sensitivity. The Green LED indicates the "Warn Away" level and the Red LED
indicates a full alarm shock sensor violation.
Use the adjustment knob to set the sensitivity of the sensor. The adjustment knob adjusts both Pre-Warn and
alarm trigger.
4 PIN SENSOR PLUG/HARNESS (WHITE):
Black Wire: Sensor Ground
Red Wire Sensor Power
Orange Wire: (-) Negative Warn-away
Yellow Wire: (-) Negative Trigger
POWER DOOR LOCK WIRING
3 PIN DOOR LOCK PLUG (Optional):
GREEN: (-) Negative pulse for LOCK
RED: +12V Coil Power for using relays.
BLUE: (-) Negative pulse for UNLOCK
Hint: Determine the type of locking system the vehicle has before connecting any wires. Incorrect connection
could result in damage to the alarm and/or the vehicle's locking system. Some vehicles are equipped with
Class 2 DATA door locks systems which require a bypass module to control the door locks. Please refer to
vehicle wiring color chart which is supplied via TechWeb (basic service) for authorized dealers.
6
Hide quick links:
Advertisement
Table of Contents
