Shock Sensor Wiring - CrimeStopper Fortress FS-20 Installation Instructions Manual

Sensor Adjustment
Adjust the main shock sensor with the small White dial. Clockwise will increase sensitivity and counter-clockwise
will decrease sensitivity. Adjust Pre-Warning level with small Black dial.
(-) TRIGGER
(-) PRE-WARN
12 VOLTS
WIRING: 4-PIN Shock Sensor (26 Gauge wires)
GREEN LED
(Pre-Warn)
Adjustments
WHITE
GROUND
SHOCK SENSOR: The sensor supplied with this system
does not require any additional wiring. Simply mount the
sensor in a suitable location, plug it in, and adjust for
sensitivity.
+ +
BLUE
BLACK
RED
6
(Trigger)
RED LED