Bowflex Max Trainer SE Service Manual page 73

11. Remove the 3 Plugs (2 indicated here from the
Handlebar Assembly.
12. Using a 5mm hex wrench, remove the hardware
that was under the Plugs from the Handlebar
Assembly.
13. Slide the Handlebar Assembly, with the Console
and Media Rack, from the Frame Assembly.
14. Remove the Ring Shrouds from the Dynamic
Handlebars.
Note: The Dynamic Handlebars have been removed for
clarity.
15. Release the 4 upper Securing Tabs on the Top
Shroud by working from one side to the other, and
then gently release the lower Securing Tab.
Handlebar
Assembly
Ring Shroud Plugs
Top Shroud
73
5
Ring Shroud