Active Carbon Filter For Removing Voc - Honeywell AutoRAE 2 User Manual

Active carbon filter for removing VOC

Whether zeroing the ppbRAE 3000 or in an environment in which the ambient air has VOC
(volatile organic compounds), you can use an Active Carbon Filter (P/N: 490-0006-000), which
filters out VOC from the air. When an AutoRAE 2 Controller is used with one or more Cradles,
the air inlet on each attached cradle is disabled and air is taken in through the Controller's air
inlet. Therefore, you only need to use one Active Carbon Filter for the Controller instead of on
each cradle. To install the Active Carbon Filter on the cradle:
1. Remove the standard filter (if one is installed).
2. Remove the plastic filter adapter by twisting the plastic filter clockwise while gently pulling
outward.
3. Press the Active Carbon Filter into the receptacle. The filter is designed for 20 uses. To help
you keep track of how many calibrations are performed, there are 20 small boxes painted
on the surface of the filter that you can mark with a pen after each use. Note: Make sure
the arrow on the side of the filter points toward the cradle.
Remove standard filter
Remove plastic filter
AutoRAE 2
adapter
Press Active Carbon Filter into
receptacle
74 User Manual