Table of Contents
Advertisement
Gas inlet settings
"Gas Inlet Information" tells the AutoRAE 2 what kind of gas is supplied to each gas inlet. The
"Gas Inlet Information" section includes configuration parameter settings for the five gas inlets
on the AutoRAE 2 Controller. For each "Gas Inlet," you can view and set the gas type,
concentration, concentration unit, purge time, and soak time. You can modify these values and
upload them to your AutoRAE 2 or download the values currently programmed into the
AutoRAE 2 to Safety Suite Device Configurator (SSDC).
There are five gas configurations (Gas Inlet 1 through Gas Inlet 5), and each can be customized
to suit the number and types of gases in each gas inlet.
Scroll down to see the "Gas Cylinders" section with the information of each gas cylinder.
The window now shows the Gas Cylinders Information, its Gas Number (number of gases in the
gas mix, if the cylinder contains more than one gas; single gas shown), Gas Lot Number,
Expiration Date, and data that includes Gas Name, Concentration, Concentration Unit, Purge
Time (Sec.), and Soak Time (Sec.).
AutoRAE 2
110
User Manual
Advertisement
Table of Contents
