Removing/Installing A Compactflash Card - Honeywell WEBsAX Series Mounting & Wiring Manual

Table 5 NXS required BIOS settings (Continued)
Menu SubMenu
Security —
Power —
Boot —
Version —

Removing/installing a CompactFlash card

The NXS has a CompactFlash card reader slot for types I/II cards—the W-NXS-AX-FL and CP-NXS-AX-FL model
includes a 1GB CompactFlash card with Windows XP Embedded OS pre-installed, as well as core files for Niagara
Typically, this card is never removed.
Notes • CompactFlash cards are not interchangeable between different NXS units, due to licensing mechanisms
used in Niagara
Only the originally-supplied CompactFlash card, or the exact replacement part can be used in the NXS.
The NXS contains electronic components that are vulnerable to static discharge. Therefore, take
Caution
precautionary measures before working with it. See
System Parameters
Supervisor Password Is
User Password Is
Set Supervisor
Password
Set User Password
Password on boot
Fixed disk boot sector
Virus check reminder
System backup reminder Disabled
Power Savings
Hard Disk Timeout
Removable Devices
Hard Drive
CD-ROM Drive
SIMATIC
BIOS Version
BIOS Number
Board Revision
CPU Type
CPU Speed
CPU ID
Code Revision
AX
, as well as in the Windows XP Embedded OS.
Defaults
Disabled
Disabled
Enter
Enter
Disabled
Normal
Disabled
Disabled
Disabled
+
L08.01.02.2
A5E00292235-ES005
V01
Celeron (R)
650 MHz
06B4
0002
"Static Discharge Precautions,"
25
W-NXS AND CP-NXS
NXS / Notes
Defaults
Defaults
—
(Read Only, may vary slightly from
values shown in your NXS)
page 5.
AX
.
74-4059—01