Table of Contents
Advertisement
Procedure
1. Depress the Drive Button until the symbol (@) ap¬
pears on the LCD panel.
2. Depress the shutter release button to shoot an initial
exposure. The film will not advance, the frame
counter indication and (@) blinks on the LCD panel
to indicate that you are in the Multi-exposure mode.
3. Recompose the frame, and depress the shutter re¬
lease button to shoot the second exposure. After the
second shot, the film will advance and the Single-
Frame shooting mode will be restored.
Notes:
• To expose two or more, depress the drive button until
the (Eg)) remains lit after the step 2 above, and then
depress the shutter release button.
• The date will be exposed in step 3 above on the
DATE model.
• Repeated multiple exposures tend to overexpose a
frame, so it is recommended that you expose a frame
just twice or 3 times at most.
• When using Multi-Exposure mode, you usually get
the best results with dimly-lit backgrounds, such as
night scenes.
31
Advertisement
Table of Contents
