Table of Contents
Advertisement
Rewinding a film in mid-roll
If you wish to unload a film before exposing all the
frames, follow procedures described below.
1 Turn the main switch ON and hold down drive
button for more than 3 seconds. (►£0) appears on the
LCD panel, indicating that the mid-roll film rewind¬
ing mode has been set.
2 While depressing the drive mode button, depress the
shutter release button. Film rewinding starts. When
a roll of film is rewound to its end, the motor stops
and (0) blinks, indicating that the back cover may be
opened safely.
Advertisement
Table of Contents
