Table of Contents
Advertisement
5
4 After the back cover is closed, the film automatically
advances to the first frame.
• Even if no film is loaded, the motor operates for a
second or two after the back cover is closed.
5 When "}" appears in the exposure counter on the
LCD panel, the film automatically stops winding.
The indication appears as shown above. If (
j)
does
not appear on the LCD panel, it indicates that the
film is not properly loaded. If this occurs, reload the
film.
If (E) blinks on the LCD panel, it means the film is
not properly loaded.
• The exposure counter indication will remain on even
if the main switch is turned off.
• Ensure the film is taut as illustrated on the previous page. Take up any slack in the film by pushing it back into
the cartridge.
• If the end of the film leader is extremely bent, straighten it or cut off the bent portion.
9
Advertisement
Table of Contents
