Table of Contents
Advertisement
&
rj%kjw ^ a
» , (Remove the film from the camera in the shade or use your body
to
UNLOADING FILM shade the camera.)
After you have exposed the last frame of the roll, the
lens retracts and the film rewinds automatically. Then,
the motor stops, and (
0
) blinks as shown to indicate
that the film has been rewound.
• A 24-exposure roll of film takes about 20 seconds to
be rewound.
• During rewinding, the exposure counter counts frame
numbers in reverse.
• The entire roll of film including the film leader is
always rewound into the cartridge to prevent any
part of the film being exposed to light.
2 Unloading the film
To unload the film, open the back cover, and remove the
cartridge from the chamber by pulling the top out first
with your finger.
Notes:
• The shutter may be released a frame or t wo even after
the specified number of frames have been used up as
indicated by the number of shots show n on the film
canister. If this occurs, these extra frames may be lost
in the processing.
• Never open the back cover until the whole film roll
is rewound.
18
Advertisement
Table of Contents
