Table of Contents
Advertisement
4.1.2
Accessing the Battery Info screen
This feature displays the current capacity and charges cycles of your battery when an IMPRES battery is
powering your radio. This feature must be enabled in your radio to see the information.
Procedure:
1.
or
to Batt.
2. Press the Menu Select button directly below Batt.
Your radio displays the following result:
Charge Percentage
Percentage of current battery capacity.
Remaining Capacity
Remaining power of the battery in mAh.
Estimated Charges
Number of charges cycles the battery has gone through.
3. To return to the Home screen, press the Menu Select button directly below Exit.
4.1.3
HAZLOC Battery Type Detection
This feature alerts you when there is a HAZLOC certification mismatch between the radio and the battery.
This feature supports IMPRES batteries only.
During power-up, the following scenarios occur if there is a mismatch:
●
The radio continuously displays Wrong Battery with red intelligent backlight.
●
The radio Voice Announcement announces the programmed Wrong Battery.
●
The battery icon blinks continuously.
●
A repetitive tone sounds.
●
The red LED blinks continuously.
NOTE:
The radio does not display any indication when the radio is connected to the charger, the radio and
battery match, or when the radio certification type is configured as None in Customer Programming
Software (CPS).
This feature is enabled through CPS configuration. Check with your dealer or system administrator for more
information.
4.2
LED Indications
The LED indications represent the operational status of your radio. A qualified technician can permanently
disable the LED indication by programming it.
MN004863A01-AN
Chapter 4: Status Indicators
25
Advertisement
Table of Contents
