Option Programming - CrimeStopper Gargoyle CS-2001FC II Series Installation & Operating Instructions Manual

1. Turn the Ignition ON and press the Override/Program button 5 times. You should hear a long chirp.
2. Within the next few seconds, press the Override/Program button [again] the number of times that
corresponds to the feature list below. The siren will chirp for each button press. DO NOT LOSE COUNT!!
3. When you get to the desired option number, press the appropriate button on the transmitter according to
the chart below. Turn Ignition off. See Below for Option numbers, descriptions, and values. (Button 1
gives a single light flash/chirp, Button 2 gives two light flashes/chirps, and Button 3 gives three light
flashes/chirps.)
4. Change ONE option at a time repeating steps 1-3 as needed. When you are finished customizing options,
check operation to see if the option(s) have changed.
PROGRAMMING OPTIONS CHART
Option # Option Description
1. Factory Horn Chirps / Pulses
2. Passive Arming /
Passive Chirp Countdown
3. Passive Lock / Cust. Override
4. Ignition controlled Locks
5. 10/60 Sec. Door Warning
6. Active Re-Arm
7. Double Unlock Pulse
8. Silent Arm/Disarm
(Chirp Defeat)
9. Parking Lights on with disarm
10. Disarm with trunk pop
11. Silent Arm/Disarm with quick
press on Button #3.
12. Door Lock Pulse Time
13. Type of Carjack Protection
14. Carjack Enable/Disable
15. Arm/Disarm with IGN on
(**Overrides Carjack functions)

OPTION PROGRAMMING

BUTTON 1
LOCK
Pulse with
trip only
ON
ON
ON*
10 Sec.
ON*
OFF*
OFF*
ON*
OFF
ON*
0.7 Sec.*
ACTIVE*
DISABLE*
DISABLED*
* = Default Setting
BUTTON 2
UNLOCK
Arm/Disarm Chirps Arm/Disarm/Warn Chirp
& Pulse with trip & Pulse with trip *
OFF* Passive Arm with
Chirp Countdown
OFF* Custom Override
OFF Ignition Lock Only
60 Sec.*
OFF
ON
ON
OFF
ON*
OFF
3 Sec.
PASSIVE
ENABLE
ENABLE**
BUTTON 3
TRUNK
FULL-TIME