Multimedia Presentation System 250
MPS-250 in a Lecture Hall Application
4 • Multimedia Presentation System 250: MPS-250
custom touchpanel based system with multiple controlled sources and display
devices, can be programmed easily using Crestron SystemBuilder™ software. And,
the MPS-250 works with Crestron's RoomView
most comprehensive facility-wide asset management solution.
Room Control Options
Without requiring any programming, the MPS-250 can be controlled simply using
Crestron's APAD LCD Controller or a selection of keypads. With custom
programming, Crestron's complete line of Isys
FlipTops is supported. Equipped with an optional CNXRMIRD IR receiver, the
MPS-250 allows any Crestron IR wireless touchpanel or handheld remote to be used
for a low-cost wireless control solution. Or, adding an RF wireless gateway or Wi-Fi
access point enables use of a wide range of 1-way and 2-way RF wireless handheld
remotes and touchpanels.
Applications
The following diagram shows an MPS-250 in a lecture hall application.
For more information on this and other QM applications, refer to the latest revision
of the Crestron MediaManager Applications Guide (Doc. 6244), which is available
from the Crestron website (www.crestron.com/manuals).
Crestron MPS-250
®
Help Desk software, the industry's
®
touchpanels and MediaManager
Operations Guide – DOC. 6647A