Crestron MPS-250
Switch Microphone Limiter
Switch Phantom Power
Operations Guide – DOC. 6647A
⇒ ON: The compression function for the selected microphone input is
enabled.
•
To exit the Microphone Compression control without saving changes, press
MENU.
A microphone limiter can be individually set on each microphone input. To switch
the microphone limiter on or off:
•
Access the Microphone menu as described on page 53.
•
Press the k or j buttons until "Mic 1 Limiter" or "Mic 2 Limiter" is
displayed on the LCD and press ENTER to open the Microphone Limiter
control.
Microphone Limiter Control (MIC 1 shown)
OFF
•
Press the k or j buttons until the desired setting is displayed on the LCD
and press ENTER to save the setting. The current setting is indicated with
an asterisk (*). The following settings are available:
⇒ OFF: The limiter function for the selected microphone input is
disabled.
⇒ ON: The limiter function for the selected microphone input is enabled.
•
To exit the Microphone Limiter control without saving changes, press
MENU.
Phantom power for the microphone inputs can be switched on or off. To switch
phantom power on or off:
•
Access the Microphone menu as described on page 53.
•
Press the k or j buttons until "Phantom Power" is displayed on the LCD
and press ENTER to open the Phantom Power control.
Phantom Power Control
Phantom Power
Off
Multimedia Presentation System 250
Mic 1 Limiter
Multimedia Presentation System 250: MPS-250 • 55