Gree GWH09AVCXB-K6DNA1B/I Owner's Manual page 25

NOTE
●
If the set temperature and the fan speed have been
adjusted during the operation under fast cooling
mode, the unit will exit from the fast cooling mode.
Then the indoor unit operates continuously under
the adjusted status.
●
Fast cooling function is only applicable for some
models. If this function is unavailable for this indoor
unit, 20 minutes later, the remote controller will turn
back to the status before fast cooling. Indoor unit
operates continuously according to current status. At
this time, status of indoor unit and the display status
on the remote controller may be different.
●
This function is only available for some models.
Auto clean function
Under unit off status, hold "Mode" and "
buttons simultaneously for 5s to turn on or turn off
the auto clean function. When the auto clean func-
tion is turned on, indoor unit displays "CL" . During
the auto clean process of evaporator, the unit will
perform fast cooling or fast heating. There may be
some noise, which is the sound of flowing liquid or
thermal expansion or cold shrinkage. The air con-
ditioner may blow cool or warm air, which is a
normal phenomenon. During cleaning process,
please make sure the room is well ventilated to
avoid affecting the comfort.
NOTE
The auto clean function can only work under normal
●
ambient temperature. If the room is dusty, clean it
once a month; if not, clean it once every three
months. After the auto clean function is turned on,
you can leave the room. When auto clean is finished,
the air conditioner will enter standby status.
●
This function is only available for some models.
Night mode
Under cooling or heating mode, when turning on
sleep mode and turn to low speed or quiet notch,
the outdoor unit would enter into night mode.
NOTE
●
When you feel that the cooling and heating effect is
poor, please press "Fan" button to other fan speed
or press "Sleep" button to exit the night mode.
●
The night mode can only work under normal ambient
temperature.
●
This function is only available for some models.
I FEEL function
Press "Health" and " + " buttons simultaneously to
start I FEEL function and "
the remote controller. After this function is set, the
remote controller will send the detected ambient
temperature to the controller and the unit will
automatically
according to the detected temperature. Press
"Health" and " + " buttons simultaneously again to
turn off I FEEL function and "
Please put the remote controller near user when
this function is set. Do not put the remote con-
troller near the object of high temperature or low
temperature in order to avoid detecting inaccu-
rate ambient temperature.When I FEEL function
is turned on, the remote controller should be put
within the area where indoor unit can receive
"
the signal sent by the remote controller.
Two-way ventilation function
Under turning on，press "Mode" and "Health"
buttons simultaneously to start up or turn off
two-way ventilation function.When two-way
ventilation function is started up,
shown on remote controller, and the light of the
two-way ventilation system is turned on. Fan
speed will be adjusted according to the fan
speed of air conditioner.
Under turning off，press "Mode" and "Health"
buttons simultaneously to start up or turn off
t w o - w a y v e n t i l a t i o n f u n c t i o n o n l y . W h e n
two-way ventilation function is started up,
will be shown on remote contro ller, and the
light of the two-way ventilation system is turned
on. Fan speed will be adjusted according to fan
button on remote controller.
NOTE
●
This function is only available for some models.
20
" will be displayed on
adjust the indoor
" will disappear.
temperature
will be