Gree GWH09AVCXB-K6DNA1B/I Owner's Manual page 21

+ / - button
Press " + " or " - " button once increase or decrease
set temperature 1℃(℉). Holding " + " or " - " button,
2s later, set temperature on remote controller will
change quickly. On releasing button after setting is
finished, temperature indicator on indoor unit will
change accordingly.
Wifi button
Press "Wifi" button to turn on WiFi function, "Wifi"
icon will be displayed on the remote controller;
Hold "Wifi" button for 5s to turn off WiFi function
and "Wifi" icon will disappear.
Under off status, press "Mode" and "Wifi" buttons
simultaneously for 1s, WiFi module will restore
factory settings.
NOTE
● This function is only available for some models.
Health button
Press this button to turn on or turn off the health
function and UVC lamp in operation status.
When selecting "
Plasma will be turn on.
When selecting "
lamp will be turn on.
When selecting "
Plasma and UVC lamp will be turn on together.
NOTE
● Health function and UVC lamp are only available for
some models.
UD-swing button
Press this button can select up & down swing angle.
Fan blow angle can be selected circularly as below:
no display
(horizontal louvers stops
at current position)
● When selecting "
fan automatically. Horizontal louver will automat-
ically swing up & down at maximum angle.
blank
No Setting
" with remote controller, Cold
" with remote controller, UVC
" with remote controller, Cold
", air conditioner is blowing
● When selecting "
tioner is blowing fan at fixed position. Horizontal
louver will stop at the fixed position.
●
Hold " " button above 2s to set your required
swing angle. When reaching your required
angle, release the button.
●
Under cooling, press this button to set comfort-
able air mode 1 "
2 " ". The recommended applicable scenes of
comfortable air modes are as follows:
Comfortable air
mode 1 "
For near field
NOTE
●
Press this button continuously more than 2s, the main
unit will swing back and forth from up to down, and
then loosen the button, the unit will stop swinging and
present position of guide louver will be kept immedi-
ately.
●
Under swing up and down mode, when the status is
switched from off to
later, status will switch to off status directly; if
press this button again within 2s, the change of swing
status will also depend on the circulation sequence
stated above.
Humidity button
Under cooling mode, press this button can select
humidity control with cooling mode, smart dehu-
midification with cooling mode, and general cooling
mode, and they can be set to operate circularly.
(blink 5s)
humidity control
with cooling mode
●
When humidity control with cooling mode is set,
the remote controller will display "
humidity value "88" and "%" icon will blink for 5s;
you can press "+" and "-" buttons to set the
humidity value within 5s.
16
、 、 、 、 " , a ir condi-
" and comfortable air mode
Comfortable air
" mode 2 "
For far field
, if press this button again 2s
smart dehumidification general
with cooling mode cooling mode
"
" , and