Uniden DXAI5588-2 Series Owner's Manual page 34

• Normally, the system
will return to standby
if it remains idle for
10 seconds after the
volume/select/ or
key is pressed. For
setting the time,
however, the idle time
is extended to two
minutes.
• Press and hold the
volume/select/ or
key to quickly
scroll through the
numbers on the
display.
[ 34 ] S E T T I N G U P Y O U R A N S W E R I N G S Y S T E M
Setting the Time
The clock on the cordless phone's answering system starts when power is supplied to
the base. Follow these steps to set the clock to the correct time.
1) With the phone in standby mode, press the menu/clock
key.
The system announces "Time" followed by the current
time and the instructions for setting the time.
2) Press the volume/select/
day is announced. The numbers [ ] through [
displayed on the main base.
3) Press the set key to select the day.
4) Press the volume/select/
the correct hour setting. The numbers [
[ ] are displayed on the main base.
5) Press the set key to select the hour.
6) Press the volume/select/
the correct minute setting. The numbers [
[ ] are displayed on the main base as each minute
is announced.
or key until the correct
] are
or key until you hear
] through
or key until you hear
] through
www.uniden.com