Using The Answering System; Answering System Options (Ans. Setup) - Uniden DECT3380-3R User Manual

If you often have to enter a series of digits or a code number
Chain dialing
during a call, you can save that code number to a phonebook entry

and use the phonebook to send the code number.
Enter the code number (up to 20 digits) into the phonebook just
like a regular phonebook entry. Be sure to enter the code number

into the phonebook exactly as you would enter it during a call.
During a call, when you hear the prompt that tells you to enter the
number, open the phonebook and find the entry that contains your

code number. Press
change your mind, use
This feature supports Frequency-Shift Keying (FSK) message
Voice message notification
notification. Contact your voice mail provider for more details.

If you subscribe to a voice mail service, your phone can notify you
when you have a new message waiting.

When you have new messages, the voice message icon ( ) appears
in the display, and the light at the top of the handset blinks.

The voice message icon should disappear after you listen to all
your new messages. If it doesn't, you can reset it manually: With

the phone in standby, open the menu and select
Select
VMWI Reset

USING THE ANSWERING SYSTEM

You can change the answering system options from any handset. Just

Answering System Options (Ans. Setup)

open the menu and select
Security Code
Ring Time
22
MEnu/sELECT
PhonEbook/LEfT
, then select
Ans. Setup
Enter a 2-digit PIN so you can access your answering
system from any touch-tone phone (see page 26).
Set the number of rings (2, 4, or 6) before the
answering system answers the phone. Choose Toll
Saver to have the system answer after 2 rings if you
have new messages or after 4 rings if you don't.
to transmit the code. Or, if you
to close the phonebook.
.
Yes
. Select one of the following:
.
Global Setup