Table of Contents
Advertisement
PAGE
BASIC OPERATION
14
HANDSET LOW BATTERY
INDICATOR
When the battery pack needs recharging, the
low battery icon will be displayed. You may
also notice a reduction in the quality of your
cordless handset communications. Return
the handset to the charging station as soon
as possible, whenever the low battery icon
is on.
To avoid a low battery condition, it is
recommended that you keep the handset in
its charging station whenever it is not in use.
USING A HEADSET
Each handset can be used with any standard
2.5 mm. headset for handsfree operation.
1
Plug the headset into the headset jack
on the top of the phone (remove the
rubber plug if it is covering the hole).
2
Calls can now be made using the
headset.
To return to using the handset
3
without a headset, simply unplug the
headset.
INSTALLING
THE BELT CLIP
1
Place one side of the belt clip into the
groove on the side of the handset.
2
Snap the other side of the belt clip
into the groove on the other side of
the handset.
(CONT.)
MAKING
AN INTERCOM CALL
You can call from one handset to another,
without tying up the outside phone line.
1
INT
From standby mode, press
.
2
Dial the desired handset number. For
example, if handset 12 calls handset
15, the LCD of the calling unit will
display:
ANSWERING
AN INTERCOM CALL
1
The LCD will show which handset is
calling.
2
Pick-up the handset and press a
keypad key. The LCD will display:
The calling party's LCD will display:
3
When the conversation is over, press
OFF
to release the call.
ROOM MONITOR
You can automatically turn on the
microphone of a handset to listen for activity.
1
INT
From standby mode, press
.
2
Dial the desired handset number. The
handset you are calling will ring.
INT
3
Press
again. The microphone of
the station you are calling will
automatically turn on.
4
OFF
Exit by pressing
.
PAGE ALL HANDSETS
To page all the handset users or to locate the
handset from the base unit:
1
PAGE
Press
on the base unit.
PAGE
2
Each handset will make a chirping
sound for about 15 seconds.
OFF
3
To turn off the page, press
on
any handset.
CALL WAITING
Call waiting is a subscription service offered
by your local telephone company. When you
are on the line and another call comes in, a
beep is emitted over the line. You can
continue speaking to the first caller or, by
FLS
pressing
(Flash), you can toggle to
speak to the second caller.
VOICE MESSAGE
INDICATION
If you subscribe to voice mail service from
your local telephone company AND if your
telephone company uses FSK message
waiting indication (a signaling method that
sends an indication that you have new,
unplayed messages in your voice mail), the
unit will alert you that you have new
messages.
The unit will detect the message waiting
signal and will activate indicators on the base
and the handsets. The base LED will flash
and the handsets will display "
".
1
To retrieve your messages, follow the
voice mail retrieval procedure specified
by your local telephone company.
Soon after you review the new
2
messages, a signal will alert the
unit to turn off the voice message
indicators.
3
To manually turn off the indicators,
FCN
DEL
press
and then press
( "
PAGE
15
1
" ).
Advertisement
Table of Contents
