Table of Contents
Advertisement
PAGE
BASIC OPERATION
10
STANDBY (IDLE) MODE
The unit is in standby mode whenever it is
idle and waiting for a call. In standby mode,
the handset LCD will display the current
ringer volume setting and the handset's
station ID:
VOLUME CONTROL
There are 5 receiver volume levels.
1
Press
or
on the side of the
handset to change the volume level
of the handset during a conversation.
2
When you reach the maximum or the
minimum volume settings, you will
hear a beep.
3
The volume control automatically
stays at the last setting after each
phone call.
PLACING A CALL
1
Pick up the handset and press either
TALK
button ( or
) .
2
Wait for a dial tone and then dial the
phone number. The number will
appear in the display as you dial.
3
Ten digits can be shown at one time
on the display. If more than ten digits
are entered, the " " will appear to
indicate that additional digits are
contained in the number.
CALL TIMER
During a phone call, a timer, located at the top
right corner of the LCD, will display the
elapsed time of the call.
TO END A CALL
OFF
1
To hang up, press
or return the
handset to its charger.
RECEIVING A CALL
When the phone rings, pick up the
1
cordless handset and press either
TALK
button ( or
) to answer the
call.
LAST NUMBER REDIAL
(RDL)
The unit remembers the last number you
dialed. The redial memory will hold up to 32
digits. Every time you dial a new telephone
number, the redial memory is updated with
the new number.
1
TALK
Press one of the
buttons
( or
) and wait for a dial tone.
2
RDL
Press
.
3
The last number dialed will be
displayed in the LCD and will be
automatically dialed.
DISPLAY REDIALING
Display redialing allows you to view the first
10 digits of the last number dialed. This is
useful if you aren't sure what number was
last dialed.
1
Without pressing one of the TALK
RDL
buttons, press
. The LCD will
display the last number dialed.
TALK
Press one of the
buttons
2
( or
) and the number will be
automatically dialed.
NOTE:
If you do not press one of the TALK buttons
within 15 seconds, the unit will return to standby
mode.
PLACING A CALL ON HOLD
1
During a phone conversation, press
HLD/XFR
on the handset. The LCD
will display:
2
If you wish to transfer the call to
another handset, dial the desired
handset ID number.
3
If you do not transfer the call, it will
remain on Hold.
AUDIBLE HOLD REMINDER
Audible Hold Reminder is designed to prevent
calls from accidentally being placed on hold
for a long duration of time. Audible Hold
Reminder automatically alerts the station that
placed the call on hold, that the call has been
unattended for longer than the hold reminder
time. The default hold reminder time is 30
seconds. To change the hold reminder time,
see page 6.
HOLD RECALL RING
If the call on hold is not picked up for 3
minutes, all handset units will start to ring
(Recall Ring) to remind all of the stations that
a call is on hold.
TAKING A CALL OFF HOLD
TALK
1
Press one of the
buttons ( or
) OR pick up another phone on the
line (including any of the extension
handsets).
2
The call will be released from Hold.
NOTE:
If a call has been on hold for more than 5
minutes, the unit will automatically disconnect the
call.
PAGE
11
Advertisement
Table of Contents
