Table of Contents
Advertisement
TROUBLESHOOTING
If your BC244CLT is not performing properly, try the following steps.
Problem
Scanner won't power up.
Poor reception.
Scan won't start.
Solution
Check the connections at both ends of the
AC Adapter.
Turn on the wall switch of your room.
You could be using an outlet controlled by the
wall switch.
Move the AC Adapter to another wall outlet.
Check antenna connection.
Move the antenna.
If the programmed frequency is higher than
406MHz, a shorter antenna length may improve
the reception.
Relocate the scanner.
You may be in a fringe area. This could require
an optional multi-band antenna. Check with your
dealer or local electronics store.
Press the SCAN key again.
Adjust the Squelch control.
Check to see if 30 channels are locked out. If so,
unlock the channels as needed.
24
Hide quick links:
Advertisement
Table of Contents
