18. A A L L A A R R M M Indicator
19. S S C C A A N N Indicator
20. P P R R I I Indicator
21. W W X X Indicator
22. H H O O L L D D Indicator
23. L L / / O O Indicator
24. P Indicator
25. Channel Display
26. Frequency/Time
Display
Scanning Overview
The BC244CLT has 30 memory channels. Each can be programmed to store one
frequency within the band of frequency coverage. (For a listing of frequency ranges
and bands, see Technical Specifications on page 26.)
When you press SCAN , the BC244CLT scans each programmed frequency for
activity (skipping channels that are locked out) at the rate of about 12 channels per
second. As the unit scans, the word S S C C A A N N moves across the display.
When the scanning stops on an active frequency, it remains on that channel as long
as the transmission continues. When the transmission ends, the scanner stays on
the channel for two more seconds, waiting for a responding transmission. If no
responding transmission is detected, the scanning cycle resumes.
Appears when Alarm function is active.
Appears when in Scan Mode.
Displays when Priority function is active.
Displays when in Weather Mode.
Displays when in Manual Mode.
Appears when the current channel is locked out.
Appears next to the channel that has been assigned as
the current priority channel.
Represents the current channel 0 0 1 1 through 3 3 0 0 .
7-digit display that shows the current frequency and
time. Last digit shows A A for a.m. and P P for p.m.
6